Tanks

Kimble™ Kontes™ Rectangular TLC Developing Tanks with Lids

Molded glass tank lids for development of any size TLC plate up to 20 × 20cm Developing Tank with Latch Lid two 20 x 20cm or

Thermo Scientific™ Nalgene™ Heavy-Duty Cylindrical LLDPE Tanks with Cover

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W. COVER HDPE 200 GAL.

Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PCCO 55GASchraubverschluss

Thermo Scientific™ Nalgene™ Heavy-Duty Rectangular LLDPE Tank with Covers

Versatility at a lower cost than stainless-steel tanks. RECTANGULAR TANK HDPE 2 GAL.

Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. Lightweight Cylindrical LLDPE Tank with Cover andSpigot, 208L

Kimble™ Kontes™ Chromatography Cylindrical TLC Developing Tanks

Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates. TLC tank Kimble cylindrical glass for 10 x 20cm

Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. TANK ZYLINDRISCH, 208L LLDPE MIT DECKEL, GRADUIERT

Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Copolymer (PPCO) Lowboys with Spigot

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 15 LITRES(2324-0015)

Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK,CYLINDRICAL,POLYPROPYLENE WITH COVER 560 X920MM DIAMETER X HT 208 LITRE

Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. TANK RECTANGULAR WITH COVER POLYPROPYLENE 200 X200 X 200MM W X D X H 8 LITRES (14200-0002)

Kimble™ Kontes™ TLC Cylindrical Developing Tanks

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates Kontes TLC Cylindrical Developing Tanks, Chromatog

Thermo Scientific™ Nalgene™ Heavy-Duty Cylindrical LLDPE Tanks with Spigots

Versatility at a lower cost than stainless-steel tanks. CYL. TANK W. SPIGOT HDPE 15 GAL.

Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners

Enhance mixing capabilities open-bag, flat-bottom Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners , which offer cost-effective, single-use fluid processing. X10 Tank Liner, 568L, 150Gal, 25kGyVE=10 Stück

Justrite™ Rinse tank floor standing, with foot treadle steel yellow 83L

RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L

Justrite™ Dip Tanks

8L DIP TANK YELLOW

Kartell™ Tap

X2 tap for tanks 1770 and 1771

Justrite™ Steel Bench Can

4L BENCH CAN W/O BSKT YELLO

Kartell™ HDPE Industrial Tanks

X24 industrial tanks HDPE 10 L GL51

Kartell™ HDPE Canitisers

X5 tanks HDPE with spigot 10 L

Kartell™ Industrial Tank

X48 industrial tanks HDPE 2 L GL45

Kartell™ HDPE Stackable Tank

X2 stackable tanks HDPE 380x280x200mm 20L

Kartell™ Tank, stackable, HDPE, 46L, 365mm x 595mm x 255mm

X2 stackable tanks HDPE 560x330x255mm 46L

Justrite™ Dip tank for cleaning parts and sub assemblies steel red 8L

Dip tank for cleaning parts and sub assemblies

Justrite™ Dip tank for cleaning parts and sub assemblies steel 30L

Dip tank for cleaning parts and sub assemblies

Justrite™ Dip tank for cleaning parts and sub assemblies steel 4L

Dip tank for cleaning parts and sub assemblies

  spinner