Well-designed cold trap for recovering the waste solvent before the centrifugal concentrator vacuum pump. Genevac™ MiVac SpeedTrap further speeds the process by maintaining a good system vacuum. Speedtrap Genevac MST-23050-A00 miVac -50°C defros

Use these accessories with the Thermo Scientific™ Cytospin™ 4 Cytocentrifuge. Sealed head seals

X100 FILTER CARD 1-PLACENr.1696

For use with centrifugal concentrators CONTROLLER MIVAC PRESSURE, VACUUM CONTROL DISPLAYunit with vacuum ramping, with connections

X2 REPLACEMENT REMOVAL TOOL/ROTOR

Designed for use with Eppendorf Rotors X2 SPARE LIDS ROTOR A-2-DWP-AT

For use with Genevac centrifugal concentrator FOUR STACKERS GENEVAC BRS-STK00-004 2 DEEP ORshallow well plates per swing increasing rotor

Allow you to operate your centrifuge operation away from, or under, your primary workbench SAFETY TROLLEY »UNDER BENCH«

Ideal for cooling, transporting, and storing deep-frozen samples. Isorack is part of the Eppendorf IsoTherm System X2 ISORACK STARTER SET F/FLEX BUCK

Designed for use with Eppendorf Rotors Rotor lid for F-45-17-17-Cryo

Centrifugal Magnetic Drive Pump

Designed for maximum performance in microlitre centrifugation coupled with reliability for routine laboratory tasks ANGLE ROTOR 30 X 0.4-2.0 ML F

Designed for use with Eppendorf Rotors and Centrifuges ROTOR KEY

Designed for use with Eppendorf Rotor FA-45-48-11 REPLACEMENT AEROSOL-TIGHT LID FOR FA-45-48-11set of 1 pcs

Designed for use with Eppendorf Rotors Spare rotor lid for F-35-6-30

For Thermo Scientific Sorvall Stratos Centrifuge O RINGS REPLACEMENT SET INC GREASE

For 1L and 3L Auto-Lock III Sorvall centrifuges Rotor Stand

Designed for use with Hettich Rotors. Hettich rotors are optimized for continuous duty and long service life REDUCTEUR 1X25ML 26X100MM

These Thermo Scientific™ accessories are for use with Shandon Octospot Starter Packs. X100 Slide Thermo Scientific solvent-resistent 8

Designed for use with Hettich Rotors. Hettich rotors are optimized for continuous duty and long service life LID FOR SUSPENSION 5051

For use with Eppendorf Rotors ROTOR LID FOR S-24-11-AT, AEROSOL-TIGHT

Hettich Lab Technology™ Slide Carrier is available as a single or double chamber slide/filter carrier for cyto-centrifuge systems. SLIDE HOLDER W/ADAPTER RING FOR CY

For use with Eppendorf Adapters and buckets 20 rubber mats for adapter 5702737003

Replacement parts for long-term care X100 CAPILLARY TUBES,HEPARINISED 1.5 X 75MM DIA X75 mm lang, VE=100 Stück

Carriers designed for MTP, DWP, PCR plates. Available for high-capacity buckets and plate/tube buckets Centrifuge Plate Carrier for High-Capacity Bucket

Designed for use with Eppendorf Rotors Aluminium-spare lid for rotor F-45-30-11

Hettich Lab Technology™ Filter Cards are used for collecting cyto centrifuge samples and come in sizes to fit accommodate a variety of chambers and carriers. X100 FILTER CARD 1-PLACE

For FA-45-18-11 and FA-45-6-30 rotor lids X5 Seal FA-45-18-11

For use with Eppendorf liquid handling products X5 Spare gasket for FA-45-12-17 (12xEppendorf 5ml)

Designed for use with Eppendorf Rotors and Centrifuges ROTOR KEY FOR A-4-81 AND MTP