Retsch

RETSCH’s philosophy is based on customer orientation and leading edge technology. This is reflected in instruments whose high-quality components are designed for perfect interaction. RETSCH products not only guarantee representative and reproducible results for grinding and particle analysis but also allow for easy and comfortable operation.

About
Products
Applications
Special Offers
Resources

Top Categories

Jaw Crushers

Jaw Crusher BB50 Jaw Crusher BB100 Other Models

Rotor Mills and Mortar Grinders

New Centrifugal Mill ZM300 Mortar Grinder RM 200 All Rotor Mills

Cutting Mills and Knife Mills

Cutting Mills Knife Mills

Disc Mills and Ball Mills

Disc Mills Ball Mills

Sieving

Sieve Shakers Test Sieves

Assisting

Sample Dividers Pellet Presses Feeders

Related Resources

RETSCH Company Video

RETSCH is the leading solution provider for neutral-to-analysis sample preparation and characterization of solids. Based on a century of experience RETSCH develops size reduction and sieving equipment.

Ultra Centrifugal Mill ZM 300

Provides maximum grinding performance combined with ease of use. Variable speed from 6000 to 23,000 rpm allows for gentle, neutral-to-analysis sample preparation in a very short time.

Mixer Mill MM 500 Vario

Versatile bench-top unit which provides ultimate performance with maximum flexibility for your sample preparation process. Used for dry, wet and cryogenic grinding of small sample amounts with high throughput.

About Retsch

All Products

1 – 15 of 472 results

RETSCH Stainless Steel Spare Knife

Rotates in the center of Grindomixer GM 200 grinding container. Retsch™ Stainless Steel Spare Knife performs both size reduction and fine grinding depending on the rotational direction. The knife is indirectly driven by a powerful motor of 900 W.

Pricing and Availability

RETSCH Glass Beads for Mills

For use with Retsch MM 200 Mixer Mills.

Pricing and Availability
Specifications

Type	Beads
For Use With (Equipment)	Mixer Mill MM 200
Quantity	500 g
Material	Glass

Retsch™ Test Sieves with 1.00 to 10.00 mm Mesh Size

Retsch™ Test Sieves consist of a solid stainless steel sieve frame with high stability, resulting in reliable sieving results.

Pricing and Availability
Specifications

Includes	Calibration Certificate
Height (Metric)	50 mm
Diameter (Metric) Outer	200 mm
Material	Stainless Steel
Certifications/Compliance	DIN ISO 3310-1

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 25 mmH, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25 mm and diameter of 200 mm. Available in a wide range of pore sizes between 1mm and 10 mm.

Pricing and Availability
Specifications

Height (Metric)	25mm
Type	Test Sieve
For Use With (Equipment)	Shaker AS 200
Diameter (Metric) Outer	200 mm
Mesh Material	Stainless Steel
Frame Material	Stainless Steel
Quantity	1 Each
For Use With (Application)	For separation, fractioning, particle size determination

RETSCH Tungsten Carbide Reversible Cutting Tip

Promotions are available

Pricing and Availability

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 25 mmH, Pore sizes greater than 10 mm, ISO 3310/1

Pricing and Availability
Specifications

Height (Metric)	25mm
Type	Test Sieve
For Use With (Equipment)	Shaker AS 200
Diameter (Metric) Outer	200 mm
Mesh Material	Stainless Steel
Frame Material	Stainless Steel
Quantity	1 Each
For Use With (Application)	For separation, fractioning, particle size determination

RETSCH Nylon Sieving Aids Brushes

Pricing and Availability

Retsch™ Test Sieves with Micro Mesh Sizes

Retsch™ Test Sieves consist of a solid stainless steel sieve frame with high stability, resulting in reliable sieving results.

Pricing and Availability
Specifications

Includes	Calibration Certificate
Height (Metric)	50 mm
Diameter (Metric) Outer	200 mm
Material	Stainless Steel
Certifications/Compliance	DIN ISO 3310-1

RETSCH Grinding Containers for Knife Mill GRINDOMIX GM 200

For use with GM 200 GRINDOMIX Knife Mills.

Pricing and Availability

RETSCH Accessories for Knife Mill Grindomix GM200

Accessories for use with Knife Mill Grindomix GM200

Pricing and Availability

RETSCH Stainless Steel Grinding Balls

Designed for use with Retsch™ mixer mills. Retsch™ Stainless Steel Grinding Balls are ideal for disruption of biological cells as well as for DNA/RNA extraction.

Pricing and Availability
Specifications

Product Type	Grinding Balls
Material	Stainless Steel

RETSCH Stainless-Steel Test Sieves, 100 mm Dia., in Micrometer Pore Sizes with ISO 3310/1

For use with Vibratory Sieve Shaker AS 200 control

Pricing and Availability
Specifications

Includes	Certificate indicating Compliance
Height (Metric)	40mm
Type	Test Sieve
For Use With (Equipment)	Shaker AS 200
Diameter (Metric) Outer	100 mm
Mesh Material	Stainless Steel
Frame Material	Stainless Steel
Quantity	1 Each
Certifications/Compliance	ISO 3310/1
For Use With (Application)	For separation, fractioning, particle size determination

RETSCH Stainless-Steel Test Sieves, 200 Dia. x 50 mmH, in Micrometer Pore with ASTM E 11

Pricing and Availability
Specifications

Includes	Certificate indicating Compliance
Height (Metric)	50mm
Type	Test Sieve
For Use With (Equipment)	Shaker AS 200
Diameter (Metric) Outer	200 mm
Mesh Material	Stainless Steel
Frame Material	Stainless Steel
Quantity	1 Each
Certifications/Compliance	ASTM E 11
For Use With (Application)	For separation, fractioning, particle size determination

RETSCH Knife Mill Grindomix GM300 Accessories: Stainless Steel Knife

Accessories for Knife Mill Grindomix GM300

Pricing and Availability

RETSCH 100 mm Dia. Stainless Steel Test Sieve

Pricing and Availability
Specifications

Height (Metric)	40mm
Type	Test Sieve
For Use With (Equipment)	Shaker AS 300
Diameter (Metric) Outer	100 mm
Mesh Material	Stainless Steel
Frame Material	Stainless Steel
Quantity	1Each
Material	Stainless Steel
Certifications/Compliance	ISO 3310/1
For Use With (Application)	For separation, fractioning, particle size determination

Laboratory Mills, Grinders and Crushers

For chemical and physical analytical methods such as AAS, NIR, ICP or XRF it is essential that the specimen is perfectly homogenized to an adequate degree of analytical fineness. A reliable and accurate analysis can only be guaranteed by reproducible sample preparation.

For these tasks RETSCH offers a comprehensive range of the most modern mills and crushers for coarse, fine and ultrafine size reduction of almost any material. The choice of grinding tools and accessories ensures that our instruments provide for contamination-free and reliable sample preparation prior to laboratory analysis.

Jaw Crushers

For efficient primary size reduction. The RETSCH Jaw Crusher range is used for the rapid, powerful crushing and pre-crushing of mediumhard, hard, brittle and tough materials. The variety of materials offered, their efficiency and safety make them ideal for sample preparation in laboratories and industrial plants.

Jaw Crusher BB50 Jaw Crusher BB100 Jaw Crusher BB200 Jaw Crusher BB300

Rotor Mills

Fine grinding with variable speed. The rotor mill series includes Ultra Centrifugal Mills, Rotor Beater Mills and Cross Beater Mills. Depending on the particular instrument they are suitable for the preliminary and fine size reduction of soft, fibrous and also hard materials.

Ultra Centrifugal Mill ZM 300 Cyclone Mill Twister

Cutting Mills

For pre-cutting and fine grinding. RETSCH cutting mills provide highly efficient primary size reduction of heterogeneous material mixes but are also suitable for grinding soft, medium-hard, elastic or fibrous samples. Cuttings mills offer a high level of operational safety and convenience. The wide selection of accessories allows for easy adaptation to different application requirements.

Cutting Mill SM 100 Cutting Mill SM 200 Cutting Mill SM 300

Knife Mills

Sample homogenization with high reproducibility. RETSCH knife mills provide completely homogeneous and reproducible size reduction results in seconds so that representative samples can be taken from any location in the grinding container.

Knife Mill Grindomix GM 200 Knife Mill Grindomix GM 300

Mortar Grinder

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes, even for samples with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. The sample grinder substitutes cumbersome hand mortars by a high performance drive with electronic control. The grinding set can be cooled and heated and is very easy to clean. Grinding sets of various material qualities are available which can be exchanged easily for optimum adaptation to various grinding tasks.

Mortar Grinder RM 200

Sieving

Particle size analysis according to DIN EN ISO 9000 ff. Particle size distribution influences the physical and chemical properties of solids. Therefore this criterion is of highest importance in the context of science and quality control.

Only if the size distribution remains constant, a steady product quality can be guaranteed, as the following examples show:

the strength of concrete depends on the particle size of the cement
the taste of chocolate is influenced by the fineness of the cocoa
the flow characteristics and solubility of washing powders depend on the fineness and particle shape of the basic materials

RETSCH sieve shakers, test sieves and evaluation software provide the key to easy, rapid, reproducible and, above all, accurate analyses.

Sieve Shakers

For particle size determination of bulk materials. RETSCH sieve shakers and sieving machines not only covers a wide measuring range. Thanks to different sieving motions and sieve sizes, the RETSCH sieve shaker range is suitable for almost any bulk material. Our sieve shakers and sieving machines produce exact and reproducible results and comply with the requirements for the test materials monitoring according to DIN EN ISO 9000 ff.

Sieve Shaker AS 200 Basic Sieve Shaker AS 200 digit cA Sieve Shaker AS 200 control Sieve Shaker AS 300 control Air Jet Sieving Machine, AS 200 jet Sieve Shaker AS 200 Sieve Shaker AS 400

Test Sieves

Highest precision for accurate sieve analysis. The well-proven RETSCH test sieves consist of a solid stainless steel sieve frame of high stability for reliable sieving results. Paying close attention to mesh-specific requirements, the fabric of each test sieve is precisely joined into the frame and tautened. The individual laser engraving of each test sieve provides a clear labeling with full traceability.

RETSCH Test Sieves

Special Offers

Resources

General Catalogue

RETSCH’s philosophy is based on customer orientation and leading edge technology.

Filename: 17557_brochure_catalogue_general_en.pdf
Size: 13 MB
Format: application/pdf

Product Overview

First class product quality thanks to advanced manufacturing methods, this is reflected in instruments whose high-quality components are designed for perfect interaction.

Filename: 17557_brochure_overview_en.pdf
Size: 3 MB
Format: application/pdf

The Art of Milling

An expert guide to neutral-to-analysis size reductionand homogenization in the laboratory.

Filename: 17557_expert_guide_milling_en.pdf
Size: 1 MB
Format: application/pdf

Sieve Analysis

Taking a close look at quality: an expert guide to particle size analysis.

Filename: 17557_expert_guide_sieving_en.pdf
Size: 2 MB
Format: application/pdf

White Paper - Different Sieving Methods for a Variety of Applications

The determination and knowledge of the particle size distribution is an essential part of the quality control process for industrial products. Easy handling, low investment cost and high accuracy make sieve analysis one of the most frequently used procedures for measuring the particle size. This white paper gives an overview of the different sieving techniques and describes the necessary steps to ensure reliable results.

Filename: 17557_more_resources_1.pdf
Size: 716 KB
Format: application/pdf

White Paper - Cryogenic Preparation of Sample Materials

A solid sample material should always be sufficiently prepared by size reduction and homogenization before it is subjected to chemical or physical analysis. Care should be taken that the analysis sample fully represents the original material and that the sample preparation process is carried out reproducibly. Most sample materials can be reduced to the required analytical fineness at room temperature by choosing a mill with a suitable size reduction principle (impact, pressure, friction, shearing, cutting).

Filename: 17557_more_resources_2.pdf
Size: 525 KB
Format: application/pdf

White Paper - How to Minimize Standard Deviations by Correct Sample Preparation

Modern analytical methods increase precision and push detection limits to make even the smallest traces of sample components detectable. Despite this development sample preparation, which is carried out prior to the actual analysis, is frequently neglected. Errors caused by lacking accuracy in sample preparation have a much bigger impact than errors made during analysis.

Filename: 17557_more_resources_3.pdf
Size: 1020 KB
Format: application/pdf

White Paper - Important Aspects of Sample Preparation of Biological Materials

Biological samples exist in all shapes and sizes: hard bones, tough and fibrous plants, tough and viscous sputum, soft muscles, tumor or liver tissue. Not to mention the millions of cells such as yeast, bacteria or algae, which have to be disrupted for applications such as DNA or RNA isolation or protein extraction. Retsch offers a range of mills and grinders for easy and reproducible pulverization of solid sample materials some of which are also suitable for cell disruption and homogenization of biological sample materials.

Filename: 17557_more_resources_4.pdf
Size: 1 MB
Format: application/pdf

White Paper - Reproducible Sample Preparation for Reliable Food Analysis

Food occurs in a great variety of consistencies and is often inhomogeneous. Food testing labs require representative samples to produce meaningful and reproducible analysis results. Therefore, food samples must be homogenized and pulverized to the required analytical fineness, ideally with as little time and effort as possible.

Filename: 17557_more_resources_5.pdf
Size: 878 KB
Format: application/pdf

White Paper - Ultrafine Grinding with Laboratory Ball Mills

How are nano particles produced? The “Bottom-Up” method synthesizes particles from atoms or molecules. The “Top-Down” method involves reducing the size of larger particles to nanoscale, for example with laboratory mills. Nano particles are produced by colloidal grinding which involves dispersion of the particles in liquid to neutralize the surface charges. Factors such as energy input and size reduction principle make ball mills the best choice for the production of nanoparticles.

Filename: 17557_more_resources_6.pdf
Size: 994 KB
Format: application/pdf

50 YEARS of Defining Standards in Quality Control - New Ultra Centrifugal Mill ZM 300

Nothing matches the performance of the original! RETSCH's Ultra Centrifugal Mills set standards in sample homogenization with more than 20,000 installations world-wide. The outstanding performance, flexibility, user-friendliness and robustness of this highspeed rotor mill make it the undisputed leader in its class.

Filename: 17557_more_resources_7.pdf
Size: 411 KB
Format: application/pdf

Retsch

Top Categories

Jaw Crushers

Rotor Mills and Mortar Grinders

Cutting Mills and Knife Mills

Disc Mills and Ball Mills

Sieving

Assisting

Featured Products

Related Resources

RETSCH Company Video

Ultra Centrifugal Mill ZM 300

Mixer Mill MM 500 Vario

About Retsch

All Products

Filtered Search Results

Narrow Results

Laboratory Mills, Grinders and Crushers

Laboratory Mills, Grinders and Crushers

Jaw Crushers

Rotor Mills

Cutting Mills

Knife Mills

Mortar Grinder

Sieving

Sieving

Sieve Shakers

Test Sieves

Special Offers

Resources