Tubes and Vials

Corning™ Centrifuge Tubes with CentriStar™ Cap

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonomics with wider knurls and roll-over edge design for easier gripping. Corning™ Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used under recommended conditions.

Eppendorf™ Snap-Cap Microcentrifuge Flex-Tube™ Tubes

Choose from six colors, including amber for light-sensitive samples

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL

Available in eight colors or in assorted-color packs.

Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes

Store samples from general cold storage to the vapor phase of liquid nitrogen with Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes.

Thermo Scientific™ 9mm Clear Glass Screw Thread Vials

Nearly eliminate septa push-through and improve sealing with vials built with the innovative Advanced Vial Closure System (AVCS).

Fisherbrand™ Borosilicate Glass Scintillation Vials, with White Polypropylene Caps

Use these general purpose vials with all common counters. Fisherbrand™ 20mL Borosilicate Glass Scintillation Vials with white polypropylene caps feature potassium-free glass composition which provides consistently low activity counts and excellent light transmission.

Falcon 50mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Fisherbrand™ Glass Screw Neck Specimen Vials

Store specimens securely with squat or tall form glass vials. Fisherbrand™ Glass Screw Neck Specimen Vials are available in a variety of sizes. Fisherbrand™ polypropylene screw caps are sold separately.

Corning™ Polypropylene Centrifuge Tubes, Sterile

Manufactured from clear polypropylene for superior chemical resistance. Corning™ Polypropylene Centrifuge Tubes are an ideal solution for centrifuge needs.

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings

Thermo Scientific™ 9mm Non-Assembled Clear Screw Thread Wide Opening Autosampler Vial Kits

Save time and reduce the risk of contamination using this convenience kit. Each kit includes 100 clear glass vials and 100 screw thread caps with pre-assembled septa.

Thermo Scientific™ 11mm Plastic Crimp/Snap Top Autosampler Vials

Choose from these chemically inert polypropylene 11mm vials that are suitable for most chromatography applications.

Fisherbrand™ Borosilicate Glass Medium Wall Rimless Test Tube

Manufactured from borosilicate glass with a medium wall design. Fisherbrand™ Borosilicate Glass Medium Wall Rimless Test Tubes are ideal for chemical and biological work.

Corning™ Mini Bioreactor Centrifuge Tube

Ideal for high throughput process optimization for suspension cell culture

Fisherbrand™ 0.2mL PCR Tube Strips

Ideal for use in 0.2mL, 96-well V-bottom thermal cyclers

Thermo Scientific™ Storage Vials & Closures

Store your samples in these vials to eliminate leaching of ions while maintaining a consistent pH for the life of your sample. Storage vials range from 2mL to 40mL.

Fisherbrand™ Externally and Internally Threaded Cryogenic Storage Vials

Choice of externally threaded vials with HDPE closures for aseptic technique, or internally threaded vials featuring polypropylene closures with silicone gasket for tight seal

Thermo Scientific™ Snap Cap Low Retention Microcentrifuge Tubes

Improve sample recovery without additives or coatings. These tubes offer maximum sample recovery by significantly reducing surface binding.

Thermo Scientific™ 11mm Assembled Autosampler Clear Glass Vial Kit, silver seal, PTFE/red rubber septum

Save time and reduce the risk of contamination using this convenience kit. It includes 100 clear vials pre-assembled with 100 screw thread caps and septa.

Falcon™ Round-Bottom Polystyrene Test Tubes

Constructed of optically clear polystyrene for easy viewing of sample. Corning™ Falcon™ Round-Bottom Polystyrene Tubes are widely used and referenced in laboratory protocols.

Corning™ Internally Threaded Cryogenic Vials

Manufactured from polypropylene for stability in extreme temperature conditions. Corning™ Internally Threaded Cryogenic Vials provide a safe and secure vessel for ultra-low temperature storage of valuable cell cultures and biological samples.

Fisherbrand™ 0.2mL PCR Tubes

With integral “snap shut” cap

Fisherbrand™ Black Polypropylene Screw Caps for Glass Specimen Vials

Screw securely into place to seal squat or tall form glass screw neck specimen vials. Fisherbrand™ Black Polypropylene Screw Caps for Glass Specimen Vials are foil lined and available in sizes to fit a variety of tall or squat form vials.

Thermo Scientific™ Nunc™ 200mL Centrifuge Tube

Process large batches more easily with Nunc 200mL centrifuge tubes, which are made from high-purity resins and can resist forces up to 7000 RCF.

BRAND™ BIO-CERT™ RNase-, DNase, DNA-free Microcentrifuge Tubes

Manufactured from virgin polypropylene. BIO-CERT™ RNase, DNase, DNA-Free Microcentrifuge Tubes are highly translucent and free from flash, air bubbles, and streaks. Fit most common rotors and may be spun up to 30,000 RCF. Flat snap caps form a tight, leak-free, easy-open seal with consistent thickness for trouble-free piercing.

Hirschmann™ Sodium Heparinized Hematocrit Tubes

Excellent for centrifuging blood in the laboratory. Hirschmann Instruments™ Sodium Heparinized Hematocrit Tubes are manufactured from disposable capillary glass.

Thermo Scientific™ Screw Top Vial Racks

Efficiently hold and organize vials while using them or for storage. Save space by stacking the 50 or 100 plastic vial racks on top of each other.

Fisherbrand™ Class A Clear Glass Threaded Vials with Caps, PTFE-faced White 14B Rubber Liner

Fisherbrand™ Type 1 Class A Borosilicate Glass Clear Sample Vials with Fitted Caps feature fitted black phenolic caps with either polycone liner or PTFE faced white rubber liner.

Falcon™ 15 mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 12,000 RCF (polypropylene) or 1,800 RCF (polystyrene) in a fully supported rotor with room temperature water. Corning™ Falcon™ 15mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Thermo Scientific™ Nunc™ 15mL and 50mL Conical Sterile Polypropylene Centrifuge Tubes

These premium, high-quality conical tubes are environmentally friendly, and allow for increased traceability with the largest writing area on the market.

  spinner