Labconco™ XPert™ Filtered Balance Systems with Guardian™ Airflow Monitor

Description

Containment-enhancing features ensure that potent powders frequently found in pharmaceutical, dry chemical, and industrial hygiene applications are kept away from the operator.

• No outside ducting required
• Accommodate large analytical and micro balances
• Available in 2-, 3-, 4-, 5- and 6-foot widths, with deep interiors
• Intrinsically safe, negative-pressure design
• Space-saving design–no separate filtered exhauster is required

• Built-in blower with dynamically balanced, vibration-isolated motorized impeller and speed control
• 40% blower reserve allows speed to be adjusted as needed by a certified technician as the filter loads
• Particulate containment independently verified by SafeBridge Consultants, Inc.
• Ergonomic air foil with aerodynamic Clean-Sweep™ airflow openings
• Exhaust HEPA filter, 99.99% efficient on particles 0.3μm in size
• Top-accessible HEPA filter for leak scanning of entire surface
• True bag-in/bag-out filter disposal system (requires certified technician)
• Upper dilution air supply
• Upper containment sash foil
• Upper diffuser screen
• Zone-perforated, pivoting rear baffle
• Side-entry air foils
• Pressure gauge
• Quiet operation–as low as 48dB

• Dry-powder-coated aluminum frame and steel rear plenum and baffle; no plastic-to-plastic bonding
• Prewired fluorescent lamp and switches for blower and light
• 0.25 in. (0.64cm) thick tempered safety glass front sash and sides
• Ergonomic angled and hinged sash pivots upward, locks to a loading height of 19 in. (50.2cm); wiping seal contains contaminants
• External gas-assist lift on 5 ft. and 6 ft. models; loading height of 27.7 in. (70.4cm)
• Two utility ports for pass-through of electrical cords

Guardian Airflow Monitor

• Continuously monitors airflow
• Green LED glows when airflow is within setpoint range
• Rred LED glows and audible alarm that sounds when airflow is outside setpoint range

Certifications

SEFA 1-2002; Modified ASHRAE™ 110-1995; ANSI™ Z9.5-1993; UL 3101-1/61010-1; CAN/CSA C22.2 No. 1010.1; CE Conformity Marking (230V models)