Heaters and Heating Mantles

Electrothermal™ EM Series Electromantle Heating Mantle

Electrothermal™ EM Series Electromantle Heating Mantle

Use these heating mantles for a variety of applications. EM Series Electromantle Heating Mantles provide maximum heat transfer to the sample thanks to excellent insulation around the cartridge and good flask coverage.

Electrothermal™ Multi Extraction Mantles - 6 Recess Model, Heating Only

Electrothermal™ Multi Extraction Mantles - 6 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch”

Fisherbrand™ CMU Metal Controlled and Uncontrolled Heating Mantles

Fisherbrand™ CMU Metal Controlled and Uncontrolled Heating Mantles

Features aluminum housing that is tough, chemical-resistant, lightweight and easy to clean

Electrothermal™ Digi-Mantle Digital Controller

Electrothermal™ Digi-Mantle Digital Controller

Accurate low speed stirring control and higher stirring speeds. Electrothermal™ Digi-Mantle Digital Controllers provide uniform stirring via a motorized rotating magnet assembly positioned to provide maximum flux linkage to rotate the stirrer bars in each reaction vessel.

Electrothermal™ EMV Series V-Shaped Electromantle

Electrothermal™ EMV Series V-Shaped Electromantle

Accommodates 60°C funnels, pear-shaped or round bottom flasks. Electrothermal™ EMV Series V-Shaped Electromantle has been designed to accept a large range of flasks and funnel sizes for added flexibility.The stainless steel screen on all EMV models covers the heater element to protect against shock hazards due to spills or flask breakage.

Fisherbrand™ Heating and Stirring Mantles

Fisherbrand™ Heating and Stirring Mantles

Chemically resistant polypropylene outer casing. Electrothermal™ Heating and Stirring Mantles offer single or bi-directional stirring.

Bibby Scientific™ Electrothermal™ Heating Element for EM/EME

Bibby Scientific™ Electrothermal™ Heating Element for EM/EME

Bibby Scientific Electrothermal Heating Element for EM/EME, Capacity: 250 mL, For Use With: 14314 EM Series Heating Mantles, Voltage: 230 V, Frequency: 50/60 Hz

Electrothermal™ EMX Series Spill-Proof Electromantle

Electrothermal™ EMX Series Spill-Proof Electromantle

Accommodates 60°C funnels, pear-shaped or round bottom flasks. Electrothermal™ EMX Series Spill-proof Electromantle is designed to accept a large range of flasks and funnel sizes for added flexibility. Stainless steel liner over the heating element providea additional electrical and mechanical protection against spills and ensures easier cleaning.

Thermo Scientific™ Reacti-Vap™ Evaporators

Thermo Scientific™ Reacti-Vap™ Evaporators

Add evaporation to the Thermo Scientific™ Reacti-Therm™ Heating and Stirring module for derivatization or other small scale reactions.

Electrothermal™ EM Series Controlled Electromantle

Electrothermal™ EM Series Controlled Electromantle

Includes a built-in energy regulator with indicator lamps for power and heater operation. Electrothermal™ EM Series Controlled Electromantle incorporates a grounded earth screen and double fuses for added safety. Larger capacity products have multiple heating elements, enabling a more even and directed transfer of heat.

Fisherbrand™ Polypropylene Controlled Heating Mantles

Fisherbrand™ Polypropylene Controlled Heating Mantles

Features a durable, chemically resistant polypropylene outer housing. Fisher Scientific™ Polypropylene Controlled Heating Mantles minimize damage from spills and allow for maximum heat transfer with minimal risk of flask breakage.

Electrothermal™ HT95503 Glass Fibre Heating Tape

Electrothermal™ HT95503 Glass Fibre Heating Tape

A flexible heater tape that is ideal for heating columns, pipes, valves and transfer lines, especially when these applications need to be observed. It can be applied to metal pipes as well as glassware.

Horst™ Glass Fiber GBW Model Fleecy Tape

Horst™ Glass Fiber GBW Model Fleecy Tape

Fleecy glass fiber tape for insulating heated sections. Horst™ GBW Glass Fiber Fleecy Tape provides protection up to 450°C.

Electrothermal™ CMU Series Uncontrolled Mantle

Electrothermal™ CMU Series Uncontrolled Mantle

Double-fused and grounded for safety. Electrothermal™ CMU Series Uncontrolled Mantle requires a controller such as MC5 or MC242.

Electrothermal™ CMUV Series Large Volume Controlled Mantle

Electrothermal™ CMUV Series Large Volume Controlled Mantle

Delivers the benefits of the CMU Electromantle, but for very large 60°C funnels, as well as pear-shaped and round bottom flasks. Electrothermal™ CMUV Series Large Volume Controlled Mantle accommodates funnels through bottom opening in the Electromantle base achieved through a “V-shaped” design for the heating mantle.

Electrothermal™ Electric Bunsen

Electrothermal™ Electric Bunsen

Combines the advantages of a regular gas burner with the clean easy operation. Electrothermal™ Electric Bunsens are ideal for non-contact heating of test tubes, crucibles, small flasks and beakers, regardless of their shape.

Electrothermal™ CMUV20/CL Heating Mantle

Electrothermal™ CMUV20/CL Heating Mantle

The CMUV Heating Mantles allow the heating of large volumes with the advantages of the CMU heating mantles. With its V-shaped design, Erlenmeyer flasks, bulbous vessels and round-bottom flasks can be used.

Thermo Scientific™ Reacti-Vap™ Evaporator Replacement Parts

Thermo Scientific™ Reacti-Vap™ Evaporator Replacement Parts

Maintain and expand the life of your Thermo Scientific™ Reacti-Vap™ Evaporator module using these quality replacement parts.

Electrothermal™ CMUA Series Stirring/Heating Mantles

Electrothermal™ CMUA Series Stirring/Heating Mantles

Magnetic stirrer and heating mantle in one convenient unit

Fisherbrand™ Heating Mantle

Fisherbrand™ Heating Mantle

Use these heating elements with built in controllers for a variety of applications. Fisherbrand™ Heating Mantles are metal cased with a unique airflow keeping the exterior cool to the touch.

Electrothermal™ HT9 Series Glass Fibre Heating Tapes

Electrothermal™ HT9 Series Glass Fibre Heating Tapes

Provides heat for columns, pipes, valves and transfer lines, especially when these applications need to be observed. Electrothermal™ HT9 Series Glass Fibre Heating Tapes can be applied to metal pipes as well as glassware.

Electrothermal™ EMEA Series 6-Position Extraction Mantle With Stirring

Electrothermal™ EMEA Series 6-Position Extraction Mantle With Stirring

Heats multiple round bottom flasks simultaneously with the added functionality of magnetic stirring. Electrothermal™ EMEA Series 3-Position Extraction Mantle With Stirring includes a vented case with unique air flow to ensure the outer case remains safe to touch.

Electrothermal™ Macro-Kjeldahl MQ Series Extraction Heater

Electrothermal™ Macro-Kjeldahl MQ Series Extraction Heater

Choose a model with 2 or 6 positions. Electrothermal™ Macro-Kjeldahl MQ Series Extraction Heater includes 2 volume sizes for both the 2 and 6 recess models, one for 100 to 300mL vessels and the second for 500 to 800mL vessels.

Electrothermal™ EMA Series Controlled Sitrring Electromantle

Electrothermal™ EMA Series Controlled Sitrring Electromantle

Includes a built-in energy regulator with indicator lamps for power and heater operation. Electrothermal™ EMA Series Controlled Sitrring Electromantle incorporates a grounded earth screen and double fuses for added safety. Larger capacity products have multiple heating elements, enabling a more even and directed transfer of heat.

  spinner